Best Rework Stations 2020 - Reviews & Buyer’s Guide

Based on the analysis of 437 reviews. By - On May 5, 2020

In this detailed guide, we will discuss best Rework Stations 2020.

In case you are searching for the same, You are at the right place. Choosing the top Rework Stations that has the best features and a worthy price is a difficult job. We have compiled the list of top 10 Rework Stations.

Best Rework Stations 2020

Image
Name and Features
Rating
Price
1. Aoyue 2703A+ SMD Profesional Repair & Rework Station
2. Aoyue 968A+ SMD Digital Hot Air Rework Station
3. Aoyue 852A++ Digital SMD Hot Air Rework Station
4. Aoyue 866 SMD Digital Hot Air Rework Station with Built in Pre-heater
5. Weller WMRP 40W/12V Micro Soldering Pencil for WD1M and WD2M Soldering and...
6. Aoyue 738H SMD Digital Hot Air Rework Station
7. Metcal MX-5211 Soldering and Rework System with 2 Hand-Pieces
8. Aoyue 2702A+ SMD Profesional Repair & Rework Station
9. Pro'sKit SS-969E SMD Rework Station
10. Aoyue 968A+ SMD Digital Hot Air Rework Station
Last updated on July 4, 2020 5:20 am

BestProducts.Wiki is reader-supported. When you buy through links on our site, we may earn an affiliate commission.


Here you can check the Top rated Rework Stations 2020 and here we are sharing the complete review of Top 10 Rework Stations. These are the Rework Stations that one can buy on the Amazon website, sorted on the basis of user ratings.

Best Rework Stations Reviews 2020

You can not find better deals on any other site. Check the Rework Stations by clicking on the link below and you can see the amazingly affordable price.

We know you are overloaded with information and we are here to help! comparing features and reading reviews scattered around the Internet, when we’ve got it all here in one place.

Don’t buy a pig in a poke, read our reviews first! In order to provide an honest and unbiased review, we test all the products and their features.

1# Aoyue 2703A+ SMD Profesional Repair & Rework Station

Oue Reviews Experts team have listed this product on number one postion.
Accoring to Benjamin Franklin- "Waste neither time nor money, but make the best use of both". So, Here we are reading to help you. This product is best.

We test various products, research websites, speak to experts to uncover their benefits, not just the boring specs, and hand-pick what’s good and weed out what’s not.

As based on 462 customer reviews, This product has an average rating of 4.9 stars out of 5 on Amazon.

Have a look at Best Place To Buy A Canopy.

This a NEW All in One repairing station the combines a Hot Air Rework Gun with a soldering iron and a desoldering Gun. This a very high quality unit from Aoyue who is a leading producer in Europe and Asia and is now introducting products to the US Market. Just screw a nozzle onto the hot air tool, place the nozzle over the QFP, SOP, PLCC or SOJ to be desoldered, apply hot air to melt the solder without ever touching the component or PC board, and gently lift the component from the board using the vacuum pickup. Soldering of the replacement SMD is just as easy. Maintains a constant set temperature when the set and the value is reached. All Digital display of temperature and pressure with touch control on the front panel. The de-soldering tool comes with zero crossing circuitry preventing electrical surges and is equipped with a strong suction vacuum pump. Built in Air Flow gauge The 24 volt soldering iron is Lead Free compatible with the compound tip design by connecting the ceramic heater, sensor control unit and tip as one. This style tip heats up extremely quickly Compatible with many nozzle types from all manufacturers. There is an Auto cool-off process that leaves the blower on until the nozzle is cool, this prolongs life of the heating element and to ensure safety. ESD safe design. Package content: Main station with hot air gun, Air nozzles (1130,1197, 1919),G001 IC popper, Z003 Hot air gun holder, Soldering Iron with Tip, Soldering Iron Holder with Solder Wire Stand, De-soldering Gun, Spare soldering iron element, manual vacuum suction pen, Power cord. SRA Soldering Products is the Exclusive Distributor and will handle warranty repairs after the first 30 days (for issues within 30 days contact Amazon directly). The warranty period is 1 year after shipment. Heating elements and soldering tips are not covered under warranty. Please contact repairs@sra-solder.com for service or spare parts or call 1-800-545-4750.

Features

  • All in One station the combines a Hot Air Rework Gun, Soldering Iron and a Desoldering Gun.
  • Programmable hot air profiles, digital calibration
  • All Digital display of air temperature, soldering iron temperature and air pressure.
  • 70 watt soldering iron is great for the lead free alloys.
  • New heat tube design allow for very even hot air flow distribution.

Pros

  • Great product
  • Durable
  • User-friendly
  • Just what was needed

Cons

  • Price may not allure everyone.

2# Aoyue 968A+ SMD Digital Hot Air Rework Station

If you are searching for the Best Rework Stations, then this product is worth to buy. Choosing the right product that has the best features and a worthy price is a difficult job.

Once you’ve read one of our helpful buyer’s guides, looked at product reviews and comparisons, you can simply click one of the links to make a secure purchase.

As based on 236 customer reviews, This product has an average rating of 4.9 stars out of 5 on Amazon.

Have a look at Best Chairs For Kids.

The NEW 968A+ has the following new features: 70 watt soldering iron with smoke absorber, Digital Display for the Soldering Iron Temperature, Soldering Iron Holder, Vacuum Pickup Kit, 10 Soldering iron tips, Spare Heating Elements for the iron and the hot air, Digital Calibration and Adjustable sleep timer for the soldering iron.

The Quality and features available on this unit are the best in the industry.

Soldering Iron Features: 70 Watt Iron using low cost standard tips Creative built-in smoke extractor that absorbs the fumes created at the source when soldering. Digital Display Digital Calibration Feature Microprocessor controlled element for precise temperature control Adjustable sleep timer Configurable soldering iron holder that uses a sponge or a brass coil

Hot Air Features Microprocessor precisely controls temperature and airflow Visual Air Flow gauge Microprocessor controlled with self-testing hot air heating core system which warns user when aging or breakdown of the heating core occurs. Maintains a constant set temperature when the set and the value is reached Digital display of hot air set and actual temperature. Auto cool-off process that leaves the blower on until the nozzle is cool, this prolongs life of the heating element and to ensure safety.

ESD Safe Unit that meets CE and RoHS.

Package List: 968A+ station with hot air gun 70 Watt Soldering iron with Silicone Cord Hot air gun holder Soldering iron holder made of Aluminum and with sponge and brass coils. Vacuum Pickup kit with 3 suction cups to easily pickup IC's Spare Heating Elements for the Hot Air Gun and the Soldering Iron 10 Soldering iron tips (T-B, T-LB, T-0.8D, T-1.2D, T-1.6D, T-2.4D, T-1C, T-0.5C, T-I(installed in soldering iron)) IC popper 5 Air nozzles ( 1124,1130, 1196, 1197, 1313 BGA-M) 2 Filter pads Instructions Power cord

Note:Solder is not Included SRA Soldering Products is the Exclusive Distributor and will handle warranty repairs after the first 30 days (for issues within 30 days contact Amazon directly). The warranty period is 1 year after shipment. Heating elements and soldering tips are not covered under warranty. Please contact repairs@sra-solder.com for service or spare parts or call 1-800-545-4750.

Features

  • 4 in 1 repairing station with a Hot Air, a 70Watt Soldering Iron, vacuum pickup and a Smoke Absorber
  • Maintains a constant set temperature when the set and the value is reached
  • Digital display for the Hot Air of the actual and set temperatures with touch control
  • Built in Air Flow gauge and knob adjustment for the air flow
  • Digital Display for soldering iron and a digital calibration and auto sleep function

Pros

  • Excellent price to performance ratio
  • Highly recommended
  • Affordable
  • Pros 4

Cons

  • None.

3# Aoyue 852A++ Digital SMD Hot Air Rework Station

If you are looking for a truly Best Rework Stations of 2020, we would recommend this product — without the slightest doubt. Most customers love Aoyue 852A++ Digital SMD Hot Air Rework Station for its performance and the use of great technology.

As based on 241 customer reviews, This product has an average rating of 4.9 stars out of 5 on Amazon.

Have a look at Best Backpacking Speaker.

This a NEW Two in One repairing station the combines a Hot Air Rework Gun with a Vacuum Pickup tool for removing components. This a very high quality unit from Aoyue who is a leading producer in Europe and Asia and is now introducting products to the US Market. Just screw a nozzle onto the hot air tool, place the nozzle over the QFP, SOP, PLCC or SOJ to be desoldered, apply hot air to melt the solder without ever touching the component or PC board, and gently lift the component from the board using the vacuum pickup. Soldering of the replacement SMD is just as easy. Maintains a constant set temperature when the set and the value is reached. All Digital display of temperature and pressure with touch control on the front panel Built in Air Flow gauge Unique 15 minute stand-by auto sleep mode with recovery function Compatible with many nozzle types from all manufacturers. There is an Auto cool-off process that leaves the blower on until the nozzle is cool, this prolongs life of the heating element and to ensure safety. ESD safe design. Package content: 852A++ station with hot air gun, Air nozzles (1124,1130,1196,1197),G001 IC popper, Z002 Hot air gun holder, 939 Vacuum suction pen, Power cord. SRA Soldering Products is the Exclusive Distributor and will handle warranty repairs after the first 30 days (for issues within 30 days contact Amazon directly). The warranty period is 1 year after shipment. Heating elements and soldering tips are not covered under warranty. Please contact repairs@sra-solder.com for service or spare parts or call 1-800-545-4750.

Features

  • Built in vacuum Pickup tool
  • 500 watt metal heater
  • Microprocessor controlled.
  • Long Life heat Element
  • Built in air flow gauge for precise adjustment

Pros

  • Great price.
  • Outstanding device
  • Brilliant price to performance ratio
  • Very high build quality

Cons

  • Expensive

4# Aoyue 866 SMD Digital Hot Air Rework Station with Built in Pre-heater

As based on 353 customer reviews, This product has an average rating of 4.9 stars out of 5 on Amazon.

Have a look at Best Metal Bed.

The NEW 866 is a revolutionary new machine with features not previously available in this price range. This is the only machine with an external temperature probe which is critical in a reflow process

It comes with 10 Soldering iron tips, Spare Heating Elements for the iron and the hot air gun

Soldering Iron Features: 60 Watt Iron using low cost standard tips Digital Display. Iron was built in auto-sleep mode to save energy and tip life

Microprocessor controlled element for precise temperature control

User Configurable 1 to 30 minute idle-to-auto-stand-by mode for additional device protection.

Configurable soldering iron holder that uses a sponge and brass coil for tip cleaning

Centigrade / Fahrenheit switchable

Hot Air Features Microprocessor precisely controls temperature and airflow Adjustment for the hot air flow Microprocessor controlled with self-testing hot air heating core system which warns user when aging or breakdown of the heating core occurs. Maintains a constant set temperature when the set and the value is reached Digital display of hot air set and actual temperature.

Auto cool-off process that leaves the Hot Air blower on until the nozzle is cool, this prolongs life of the heating element and to ensure safety.

ESD Safe Unit that meets CE and RoHS.

Package List: Aoyue 866 station with Pre-Heater and hot air gun, External Temperature Probe, 60 Watt Soldering iron with Silicone Cord, Hot air gun holder with full articulating arm for full board coverage, Soldering iron holder made of Aluminum and with sponge and brass coils for cleaning the tips, Spare Heating Elements for the Hot Air Gun and the Soldering Iron, Vacuum Pickup Pen, 10 Soldering iron tips (T-B, T-LB, T-0.8D, T-1.2D, T-1.6D, T-2.4D, T-1C, T-0.5C, T-I(installed in soldering iron)), IC popper, 4 Air nozzles ( 1194, 1195, 1198, BGA-S), Instructions, Power cord SRA Soldering Products is the Exclusive Distributor and will handle warranty repairs after the first 30 days (for issues within 30 days contact Amazon directly). The warranty period is 1 year after shipment. Heating elements and soldering tips are not covered under warranty. Please contact repairs@sra-solder.com for service or spare parts or call 1-800-545-4750.

Features

  • All in 1 Repairing station with a Hot Air, a 60 Watt Soldering Iron, Quartz IR Pre-heater
  • PID Technology Maintains a constant set temperature when the set and the value is reached
  • Digital display for the Hot Air for the actual and set temperatures with touch control
  • Unique Board Holding system to hold any shaped board and a Fully articulating hot air gun holder
  • Flexible External Temperature Probe so you can measure board temperature or component temperature

Pros

  • Great customer service.
  • Worth the money
  • Easy to use.
  • Top of the line build quality.

Cons

  • Price may not allure everyone.

5# Weller WMRP 40W/12V Micro Soldering Pencil for WD1M and WD2M Soldering and Rework Stations, No Tip

As based on 221 customer reviews, This product has an average rating of 4.9 stars out of 5 on Amazon.

Have a look at Best Dermabrasion Cream.

Weller transforms hand soldering The art of hand soldering has been around for a very, very long time, thousands of years in fact. But it was only until 1941 that a transformer based instant heating soldering method was developed by an impatient American radio repairman who was tired of sitting around waiting for his soldering gun to heat up. Carl E. Weller had to wait until after WWII ended in 1945 to get his Weller Manufacturing Company going. In 1960, the Weller Manufacturing Co. in the US patented the “Magnastat” soldering iron which used a magnetic component to regulate the temperature at the iron’s tip. In an expansion overseas beginning in 1959, the Weller ElektroWerkzeuge GmbH plant in Besigheim, Germany, along with new plants in other countries, was organized to manufacture temperature controlled irons and soldering guns for primarily industrial mar­kets throughout Europe and the Near East. Keeping pace with the increasing complexity of our customers’ needs, Weller Ger­many be­came the market leader for developing and manufacturing hand soldering products worldwide. Our products were proudly emblazoned with “Made in Germany”, signifying innovation and reliability.

Features

  • Extremely short heat-up time; Maximum wattage of 55W
  • Changing soldering tips is quick and easy and requires no tools
  • Chrome plated aluminum pencil weights just 75g
  • Just 45mm tip-to-grip, so you're close to the work
  • Tip has integral comfort grips for "no-tool" tip change (Tips Sold Separately)

6# Aoyue 738H SMD Digital Hot Air Rework Station

As based on 145 customer reviews, This product has an average rating of 4.9 stars out of 5 on Amazon.

Have a look at Best Automatic Watch Under 300.

The NEW 738H+ has the following features: 70 watt soldering iron with smoke absorber, Tool Box, Temperature calibration, Vacuum Pickup Kit, 10 Soldering iron tips, Spare Heating Elements for the iron and the hot air, Digital Calibration and Adjustable sleep timer for the soldering iron.

The Quality and features available on this unit are the best in the industry.

Soldering Iron Features: 70 Watt Iron using low cost standard tips Creative Removable built-in smoke extractor that absorbs the fumes created at the source when soldering. Digital Display Digital Calibration Feature Microprocessor controlled element for precise temperature control Adjustable sleep timer Configurable soldering iron holder that uses a sponge or a brass coil

Hot Air Features Microprocessor precisely controls temperature and airflow Visual Air Flow gauge Microprocessor controlled with self-testing hot air heating core system which warns user when aging or breakdown of the heating core occurs. Maintains a constant set temperature when the set and the value is reached The highest wattage heater on the market(600 watts) enables this unit to tackle any size job Digital display of hot air set and actual temperature. Auto cool-off process that leaves the blower on until the nozzle is cool, this prolongs life of the heating element and to ensure safety.

ESD Safe Unit that meets CE and RoHS.

Package List: 738H station with hot air gun 70 Watt Soldering iron with Silicone Cord Hot air gun holder Soldering iron holder made of Aluminum and with sponge and brass coils. Vacuum Pickup kit with 3 suction cups to easily pickup IC's Spare Heating Elements for the Hot Air Gun and the Soldering Iron 10 Soldering iron tips (T-B, T-LB, T-0.8D, T-1.2D, T-1.6D, T-2.4D, T-1C, T-0.5C, T-I(installed in soldering iron)) IC popper 6 Air nozzles ( 1124,1130, 1196, 1197, 1010, 1313 BGA-M) 2 Filter pads Instructions Power cord SRA Soldering Products is the Exclusive Distributor and will handle warranty repairs after the first 30 days (for issues within 30 days contact Amazon directly). The warranty period is 1 year after shipment. Heating elements and soldering tips are not covered under warranty. Please contact repairs@sra-solder.com for service or spare parts or call 1-800-545-4750.

Features

  • 5 in 1 repairing station with a Hot Air, a 70Watt Soldering Iron, vacuum pickup and a Smoke Absorber
  • Maintains a constant set temperature when the set and the value is reached
  • Digital display for the Hot Air of the actual and set temperatures with touch control
  • Free Tool Box to hold all of the spare tips, nozzle and elements
  • Digital Display for soldering iron and a digital calibration and auto sleep function

7# Metcal MX-5211 Soldering and Rework System with 2 Hand-Pieces

As based on 161 customer reviews, This product has an average rating of 4.9 stars out of 5 on Amazon.

Have a look at Best Mousepad For Carpal Tunnel.

New Dual Port Simultaneous Soldering and Rework System highly effective for soldering applications including: lead-free, high mass components or boards, thermally sensitive components requiring low operating temperature, high volume production soldering and touch-up soldering operations.

Features

  • Can be operated with two hand-pieces dynamically sharing the 80 watts output power based on demand adding even more application flexibility and speed
  • Configured with two Metcal Advanced Soldering and Rework Hand-pieces
  • Microprocessor controlled power supply providing more power for challenges such as high mass components, multi-layered boards and lead-free solders
  • Improved ergonomics with lightweight hand-pieces
  • Greater process control with SmartHeat Technology

8# Aoyue 2702A+ SMD Profesional Repair & Rework Station

As based on 129 customer reviews, This product has an average rating of 4.9 stars out of 5 on Amazon.

Have a look at Best Racing Goggles For Swimming.

This a NEW All in One repairing station the combines a Hot Air Rework Gun with a soldering iron and a desoldering Gun. This a very high quality unit from Aoyue who is a leading producer in Europe and Asia and is now introducting products to the US Market. Just screw a nozzle onto the hot air tool, place the nozzle over the QFP, SOP, PLCC or SOJ to be desoldered, apply hot air to melt the solder without ever touching the component or PC board, and gently lift the component from the board using the vacuum pickup. Soldering of the replacement SMD is just as easy. Maintains a constant set temperature when the set and the value is reached. All Digital display of temperature and pressure with touch control on the front panel. The de-soldering tool comes with zero crossing circuitry preventing electrical surges and is equipped with a strong suction vacuum pump. Built in Air Flow gauge The 24 volt soldering iron is Lead Free compatible with the compound tip design by connecting the ceramic heater, sensor control unit and tip as one. This style tip heats up extremely quickly Compatible with many nozzle types from all manufacturers. There is an Auto cool-off process that leaves the blower on until the nozzle is cool, this prolongs life of the heating element and to ensure safety. ESD safe design. Note: The desoldering gun and soldering iron share the same connector so that can't be used at the same time. Package content: Main station with hot air gun, Air nozzles (1124,1130,1197, 1313, 1818),G001 IC popper, Z003 Hot air gun holder, Soldering Iron with Tip, Soldering Iron Holder with Solder Wire Stand, De-soldering Gun, Spare soldering iron element, manual vacuum suction pen, Power cord. SRA Soldering Products is the Exclusive Distributor and will handle warranty repairs after the first 30 days (for issues within 30 days contact Amazon directly). The warranty period is 1 year after shipment. Heating elements and soldering tips are not covered under warranty. Please contact repairs@sra-solder.com for service or spare parts or call 1-800-545-4750.

Features

  • All in One station the combines a Hot Air Rework Gun with a Soldering Iron and a Desoldering Gun.
  • Microprocessor Controlled ESD safe unit; Heating Element:Ceramic Heater
  • All Digital display of air temperature, soldering iron temperature and air pressure.
  • 70 watt soldering iron is great for the lead free alloys.
  • De-soldering tool comes with zero crossing circuitry preventing electrical surges.

9# Pro'sKit SS-969E SMD Rework Station

As based on 386 customer reviews, This product has an average rating of 4.9 stars out of 5 on Amazon.

Have a look at Best Baby Keepsake Book.

SMD rework station has microprocessor-controlled, closed circuit sensor design, high power and quick warm-up times. Brushless motor design, quiet in operation, equipment noise less than 45dB. Also for heating shrink, viscidity removal, lacquer removal, preheating.

Features

  • Adjustable air flow, air volume and temperature, suitable for a variety of applications
  • Handle with sensor design provides real-time operating convenience
  • Safe solder QFP, PLCC, BGA and other temperature sensitive components
  • Auto cool-off process to prolong the life of heating element
  • Plastic shell, compact body, beautiful, small footprint

10# Aoyue 968A+ SMD Digital Hot Air Rework Station

As based on 175 customer reviews, This product has an average rating of 4.9 stars out of 5 on Amazon.

Have a look at Best In Wall Speakers For Home Theater.

The NEW 968A+ has the following new features: 70 watt soldering iron with smoke absorber, Digital Display for the Soldering Iron Temperature, Soldering Iron Holder, Vacuum Pickup Kit, 10 Soldering iron tips, Spare Heating Elements for the iron and the hot air, Digital Calibration and Adjustable sleep timer for the soldering iron.

The Quality and features available on this unit are the best in the industry.

Soldering Iron Features: 70 Watt Iron using low cost standard tips Creative built-in smoke extractor that absorbs the fumes created at the source when soldering. Digital Display Digital Calibration Feature Microprocessor controlled element for precise temperature control Adjustable sleep timer Configurable soldering iron holder that uses a sponge or a brass coil

Hot Air Features Microprocessor precisely controls temperature and airflow Visual Air Flow gauge Microprocessor controlled with self-testing hot air heating core system which warns user when aging or breakdown of the heating core occurs. Maintains a constant set temperature when the set and the value is reached Digital display of hot air set and actual temperature. Auto cool-off process that leaves the blower on until the nozzle is cool, this prolongs life of the heating element and to ensure safety.

ESD Safe Unit that meets CE and RoHS.

Package List: 968A+ station with hot air gun 70 Watt Soldering iron with Silicone Cord Hot air gun holder Soldering iron holder made of Aluminum and with sponge and brass coils. Vacuum Pickup kit with 3 suction cups to easily pickup IC's Spare Heating Elements for the Hot Air Gun and the Soldering Iron 10 Soldering iron tips (T-B, T-LB, T-0.8D, T-1.2D, T-1.6D, T-2.4D, T-1C, T-0.5C, T-I(installed in soldering iron)) IC popper 5 Air nozzles ( 1124,1130, 1196, 1197, 1313 BGA-M) 2 Filter pads Instructions Power cord

Note:Solder is not Included SRA Soldering Products is the Exclusive Distributor and will handle warranty repairs after the first 30 days (for issues within 30 days contact Amazon directly). The warranty period is 1 year after shipment. Heating elements and soldering tips are not covered under warranty. Please contact repairs@sra-solder.com for service or spare parts or call 1-800-545-4750.

Features

  • 4 in 1 repairing station with a Hot Air, a 70Watt Soldering Iron, vacuum pickup and a Smoke Absorber
  • Maintains a constant set temperature when the set and the value is reached
  • Digital display for the Hot Air of the actual and set temperatures with touch control
  • Built in Air Flow gauge and knob adjustment for the air flow
  • Digital Display for soldering iron and a digital calibration and auto sleep function

Over To You

Selecting the top-performing Rework Stations requires a lot of research and testing. We already have done that for you. So, what you need to do is go through our buying guide list down your requirements and then grab the one that fits you.

If you have any queries or doubts regarding Rework Stations, share with us in the comment section given below. We’re happier to clarify your doubts as early as possible.

Leave a Comment